Not a member yet? Why not Sign up today
Create an account  

  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
 
Custom designed APS

#31
(2018-10-02, 10:58 PM)EnzeeeJ Wrote: Hey, are you still doing requests? I might have something for you

Sure thing! let me know your requirements
if any of the below pieces of information are unnecessary, leave them blank

Turret Block: (1 axis, 1 axis 3m, elevation, etc.)
below decks: WxH
Neck: WxH
maximum Cap size: WxLxH
Number of Guns: 0
Gauge: 0.0mm
Barrels: 0
Autoloaders: (direct input, clipless, 1 clip, 2 clip, 3 clip, 4 clip, beltfed)
Autoloader length: (1-8, or leave blank if using direct input)
Firing Style (continuous or burst)
Mantlet: (1m omni, 3m elevation, AA, etc.)
Shell Length: (measured in components, remember to keep it under (autoloader length/gauge) unless direct input)
Gunpowder length: (around half of shell length typically results in 300-400m/s)
Notes: (if you have anything to add)
Reply

#32
Hello, can I order a :
5m turret block
9Wx11H (Including the turret block)
5x5 armored turret neck
No limit on the cap size, just make it reasonable for the turret's size
2 gun turret
400~500mm whatever works best
Autoloaders: With clips, whatever works best...
Autoloader length: 4m
Firing style: Continuous (About 30rpm for 500mm and 40 for anything less...)
Mantlet: 2m AA
Shell length: The longest possible....
Gunpowder: "
Notes: It doesn't have to adhere to everything as my description was quite vague...)
Reply

#33
(2018-10-07, 01:11 PM)Ilackcreativityinnames Wrote: Hello, can I order a :
5m turret block
9Wx11H (Including the turret block)
5x5 armored turret neck
No limit on the cap size, just make it reasonable for the turret's size
2 gun turret
400~500mm whatever works best
Autoloaders: With clips, whatever works best...
Autoloader length: 4m
Firing style:  Continuous (About 30rpm for 500mm and 40 for anything less...)
Mantlet: 2m AA
Shell length: The longest possible....
Gunpowder: "
Notes: It doesn't have to adhere to everything as my description was quite vague...)
sure thing, one 5m base, 9x11+5x1 2 500mm gun turret firing 4m frag/HESH shells at 30 rpm from 1-2 clip autoloaders, through a AA mantlet with an alright looking cap coming right up!


Attached Files
.blueprint   Ilackcreativityinnames.blueprint (Size: 249.37 KB / Downloads: 13)
Reply

#34
hello good sir, i would like to request a:
Turret Block: (1 axis 3m)
below decks: 7Wx7H
Neck: 3Wx3H
maximum Cap size: 9Wx15Lx4H
Number of Guns: 3
Gauge: 200.0mm
Barrels: 1
Autoloaders: (1 clip or 2 clip, whatever gives the best result)
Autoloader length: (1 or 2 meter, whatever is most combat effective)
Firing Style (continuous)
Mantlet: (1m elevation)
Shell Length: (5 is you use 1m autoloader, 10 is you use 2m)
Gunpowder length: (about half)
Notes: (i would like to see what the best shell and turret design would be to make 200mm relatively effective)
[Image: WE3eo57.jpg]

Reply

#35
(2018-10-21, 11:49 PM)EnzeeeJ Wrote: hello good sir, i would like to request a:
Turret Block: (1 axis 3m)
below decks: 7Wx7H
Neck: 3Wx3H
maximum Cap size: 9Wx15Lx4H
Number of Guns: 3
Gauge: 200.0mm
Barrels: 1
Autoloaders: (1 clip or 2 clip, whatever gives the best result)
Autoloader length: (1 or 2 meter, whatever is most combat effective)
Firing Style (continuous)
Mantlet: (1m elevation)
Shell Length: (5 is you use 1m autoloader, 10 is you use 2m)
Gunpowder length: (about half)
Notes: (i would like to see what the best shell and turret design would be to make 200mm relatively effective)
i'm really sorry for taking so long to get back to you, i'll build this first thing in the morning (if i get a chance)
Reply

#36
Hello! I'm back playing FTD and I'm building a new battleship. I need the cannons to be fully optimized for the space I have:

Turret Block: 1 axis 3m
below decks: 7x7
Neck: max 5x1
maximum Cap size: 9x14x5
Number of Guns: 2
Gauge: 500mm
Barrels: 1 each
Autoloaders: Clipless, 1-clip, or 2-clip
Autoloader length: 4m
Firing Style: Continuous
Mantlet: 2m AA
Shell Length: 9
Gunpowder length: 4
Notes: (I'd like this turret to be more durable over more firepower)
Reply

#37
(2018-10-21, 11:49 PM)EnzeeeJ Wrote: hello good sir, i would like to request a:
Turret Block: (1 axis 3m)
below decks: 7Wx7H
Neck: 3Wx3H
maximum Cap size: 9Wx15Lx4H
Number of Guns: 3
Gauge: 200.0mm
Barrels: 1
Autoloaders: (1 clip or 2 clip, whatever gives the best result)
Autoloader length: (1 or 2 meter, whatever is most combat effective)
Firing Style (continuous)
Mantlet: (1m elevation)
Shell Length: (5 is you use 1m autoloader, 10 is you use 2m)
Gunpowder length: (about half)
Notes: (i would like to see what the best shell and turret design would be to make 200mm relatively effective)

hi, i managed to build two similar guns for you, one with 1m loaders at 35rpm, and one with 2m loaders at 19 rpm, i'm afraid that i couldn't get anything better in that space with that many guns. the turrets also features partial metal armour, in all the places that the gun didn't take up, mostly in front. hope it's still relevant Tongue


Attached Files
.blueprint   EnzeeeJ 1m and 2m.blueprint (Size: 115.73 KB / Downloads: 9)
Reply

#38
In case you're still doing these

Turret Block: (1 axis, 1 axis 3m, elevation, etc.)
below decks: 13x10
Neck: 3x5
maximum Cap size: Any
Number of Guns: 3
Gauge: 380-420
Barrels: 3
Autoloaders: 1-2 Clips (or both, whatever lets you make the most effective)
Autoloader length: 4
Firing Style Continuous
Mantlet: 1m elevation
Shell Length: Any
Gunpowder length: Any
Notes: (if you have anything to add)
Reply



Forum Jump:


Users browsing this thread:
1 Guest(s)