Not a member yet? Why not Sign up today
Create an account  

  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
 
A bunch of Cram Turrets

#1
Like the thread says, I wanted to share a few of my Cram Turrets with you.

I tried to get as much out of the space as possible and ended up with the following designs:

1. The smallest turret you could wish for; 3x3x4 inside the hull and a 1m piece leading out of it. It has a makeshift turretcap made out of gauge increases.

Its features are:
  • 1748mm shell diameter
  • 8 ammo boxes
  • 7.5 hardening boxes
  • 4.5 explosive boxes



2. This turret requires 5x5x4 space inside the hull and has a 1m piece leading out of it just like 1. Though this turret does not have a turretcap at all.

Its features are:
  • Inertial fuse
  • 1832 shell diameter
  • 6 ammo boxes
  • 38 explosive boxes



3. This turret requires 7x7x7 space inside the hull and requires a 3x3 exit leading out of it. It does not have a turretcap.

Its features are:
  • 2 Cannons
  • Inertial & Pen.depth fuse
  • 1991 shell diameter
  • 8 ammo boxes
  • 19 hardening boxes
  • 25 explosive boxes
  • 7 frag boxes



4. This turret requires 9x9x7 space inside the hull and requires a 3x3 exit leading out of it. It does not have a proper turretcap, but it has some gauge increases on the outside of it.

Its features are:
  • 4 Cannons
  • Inertial & Pen.depth fuse
  • 1956 shell diameter
  • 12 ammo boxes
  • 14 hardening boxes
  • 9 explosive boxes
  • 9 frag boxes



5. This turret requires 11x11x7 space inside the hull and requires a 3x3 exit leading out of it. It does not have a proper turretcap and sadly has a lot of gauge increases on the outside of it.

Its features are:
  • 4 Cannons
  • Inertial & Pen.depth fuse
  • 1884 shell diameter
  • 12 ammo boxes
  • 32 hardening boxes
  • 38 explosive boxes
  • 31 frag boxes



6. This turret requires 13x13x7 space inside the hull and requires a 3x3 exit leading out of it. It does not have a turretcap.

Its features are:
  • 4 Cannons
  • Inertial & Pen.depth fuse
  • 1929shell diameter
  • 16 ammo boxes
  • ~38 hardening boxes
  • ~82.5 explosive boxes
  • 62 frag boxes
Though some of the internal boxes are shared between cannons...



Ive also included the design blocks Ive used to create allmost all these turrets.
(For those that want to look inside of them and dont want to cut them apart first. Wink )

Ive also added a few (2 at the moment) different layout options for 1.
One would be a duo cannon variant with the same size restrictions Wink


Attached Files
.blueprint   Cram Turrets.blueprint (Size: 259.42 KB / Downloads: 164)
Reply



Messages In This Thread
A bunch of Cram Turrets - by Wedengart - 2016-12-08, 06:35 PM
RE: A bunch of Cram Turrets - by Sir Metaladon - 2016-12-16, 10:44 PM
RE: A bunch of Cram Turrets - by Wedengart - 2016-12-19, 09:03 PM
RE: A bunch of Cram Turrets - by Tryptic - 2018-01-12, 02:43 PM
RE: A bunch of Cram Turrets - by MizarLuke - 2018-01-17, 08:32 PM
RE: A bunch of Cram Turrets - by Greyfell - 2018-01-21, 01:43 AM
RE: A bunch of Cram Turrets - by MizarLuke - 2018-01-21, 11:51 PM
RE: A bunch of Cram Turrets - by NutterChap - 2018-01-22, 08:44 AM
RE: A bunch of Cram Turrets - by MizarLuke - 2018-01-22, 02:31 PM
RE: A bunch of Cram Turrets - by YD12 - 2018-01-23, 01:21 AM

Forum Jump:


Users browsing this thread:
1 Guest(s)